CAM for MASSO plasma

Plasma tables run by a MASSO G3 controller with its torch height control.

From the maker's documents

Open MillPath The controller check

What the MASSO plasma post writes

M3 fires and M5 stops the torch; no Z (MASSO sets the torch height)
Pierce delay G4 P in milliseconds
M667 turns the THC on along the cut, M666 off
Comments in capitals, M30 at the end

Files end in .nc. Every file is read back before export and checked against the simulated toolpath.

Shaped after Autodesk's Fusion Masso Plasma post (2026) and MASSO's own G-code pages.

Where this post comes from

Another CAM program: Autodesk Fusion Masso Plasma post (2026)
The controller maker: MASSO documentation: G04 P in milliseconds

Not yet confirmed on a machine. This post follows the sources above. Before the first real job, run the controller check in the air, or compare with a file that already runs on your machine (Export options → Check this post).