// Operations · key H
Chamfer
Bevels or rounds an edge with a chamfer mill, a V-bit or a roundover bit.
Use it for: Breaking sharp edges, deburring, decorative bevels, rounded edges on furniture and signs.
Tool: A chamfer mill or V-bit for a bevel; a roundover bit (its radius and tip diameter in the tool) for a rounded edge.
Settings
| Setting | What it does | Default |
|---|---|---|
| Side | Outside, inside or on the line. | Auto |
| Chamfer width | The width of the bevel; the depth follows from the tool angle. | 0.5 mm |
| Roundover radius | With a roundover bit: up to the bit's radius. Less gives a partial roundover that meets the top at an angle. | the bit's radius |
Every operation also has: Tool, Include in G-code, Own safe heights, Start depth, Coolant, see Heights. Hover the (i) next to a setting in the app for the same explanations.
Tips
- With a roundover bit the tip goes the radius below the top with its small end on the edge, so the curve meets the wall without a step.